Winchester Repeating Arms 1200 (Historic Manual) User Manual
Page 10

TO TAKE DOWN
Be certain that gun is unloaded. Check both
chamber and magazine.
1. With action closed, push safety to “ON” position.
2. Unscrew and remove magazine cap.
3. Slide barrel forward until the magazine tube
bracket slides free of the magazine tube and the barrel
comes out of the receiver. Lift barrel out.
4. Screw on magazine cap by hand until tight.
8
See also other documents in the category Winchester Repeating Arms Sports and recreation:
- 70 (36 pages)
- X3 Shotgun (44 pages)
- X Rifle (28 pages)
- X Pump (SXP) (36 pages)
- Wildcat (24 pages)
- Select (34 pages)
- 94 (Includes Take Down) (36 pages)
- 1885 Centerfire (36 pages)
- 1885 Creedmoor (13 pages)
- 1892 (24 pages)
- 1895 (32 pages)
- 1895 Saddle Ring Carbine (12 pages)
- 1895 Take Down (15 pages)
- 1885 Rimfire (21 pages)
- 1873 (19 pages)
- 101 (36 pages)
- SX-AR (Historic Manual) (32 pages)
- 70 (Historic Manual) (31 pages)
- 94 Top Tang Safety (Historic Manual) (32 pages)
- 9410 Top Tang Safety (Historic Manual) (44 pages)
- 9417 (Historic Manual) (29 pages)
- 9422 (Historic Manual) (30 pages)
- 1300 (Historic Manual) (34 pages)
- 94 Cross Bolt Safety (Historic Manual) (34 pages)
- 94 Pre 1992 (Historic Manual) (18 pages)
- 9410 Cross Bolt Safety (Historic Manual) (40 pages)
- 1886 (Historic Manual) (43 pages)
- 1886 Supplement (Historic Manual) (12 pages)
- 1400 (Historic Manual) (19 pages)
- 63 (Historic Manual) (23 pages)
- Super X2 (Historic Manual) (43 pages)
- Super X2 Sporting Supplement (Historic Manual) (8 pages)
- Super X2 Practical Supplement (Historic Manual) (4 pages)
- Super X2 Practical Supplement (Historic Manual) (8 pages)
- Supreme (Historic Manual) (35 pages)
- BOSS (Historic Manual) (15 pages)
- 52B (Historic Manual) (19 pages)