Kessler MOTION CONTROL: Oracle Controller Full (2.06.2 SL) - Manual (Page 19)

8. Move the joystick up or down to select one of the
following: ShootMoveShoot, Continuous,
Stop Motion, or No Intervlmtr (Intervalometer)
Press the MIDDLE JOYSTICK BUTTON or ENTER to confirm
Note:
See page 17 for details on different shooting modes
9. Move the joystick UP/DOWN to select the number of
Pictures
10. Press ENTER or the MIDDLE JOYSTICK BUTTON to confirm
or scroll through the sub-menus by moving the joystick
LEFT/RIGHT
11. You can adjust Y:Playback Time from the time you
took to make the recording up to 29.5 days.
Press ENTER or the MIDDLE JOYSTICK BUTTON to confirm
ShootMoveShoot
Continuous v
Stop Motion ^
No Intervlmtr
SMARTLAPSE™ TIME LAPSE
MOTION CONTROL - SMARTLAPSE™
CONTINUED
Note:
(Only in Shoot - Move - Shoot)
Make sure to have “Synced” shown if you want your camera time to
auto sync with the SmartLapse™ play back. Otherwise if you selected
1 hour for the camera time and 2 hours for SmartLapse™, your camera
will finish at 1 hour with the slider/head running for an additional hour.
12. Return to your marked Start Position
13. Press ENTER or the MIDDLE JOYSTICK BUTTON to start the
playback
14. You will see the current memory bank being used as well as
the time remaining
15. To cancel the playback and return to the menu, press ANY
BUTTON on the ORACLE.
Pictures
1000
Y:Playback Time
Synced 1.00 H
Memory 1
1.16 H
19