IDX i400 - Manual (Page 3)

Rev. 2004.04.26
OPERATIONAL PRECAUTIONS
1. During charging the unit will get a little warm, this is normal.
2. Do not rest any object on the unit, or block the ventilation holes during operation.
3. Only use approved Nickel Cadmium and Nickel Metal Hydride batteries; do not use faulty
batteries or those with incorrect specifications.
4. Other batteries besides 12V/13.2V NP/BP (1Ah~7Ah) may be charged with the appropriate
adapter, contact IDX for details.
5. Do not expose the unit to direct sunlight, use in well ventilated place.
6. For longer battery life it is recommended to fully discharge once for every 8 charge cycles.
7. If the unit’s power fails to come on, check the fuse. If necessary, replace with spare fuse provided.
8. For repair or service do not open the unit, please contact the factory offices or authorized
distributors.
FOR SALES AND SERVICE CALL
In Japan/Asia
IDX Company, LTD
6-28-11 Shukugawara,
Tama-ku, Kawasaki-Shi,
Kanagawa-ken 214-0021, Japan
Sales and service
Phone +81-44-850-8801
Fax +81-44-850-8838
Email : [email protected]
In the United States
IDX System Technology
1602 Lockness Place,
Torrance, CA 90501 USA
Sales and Service
Phone +1-310-891-2800
Fax +1-310-891-3600
Email : [email protected] In Europe/Middle East
IDX Technology Europe Ltd.
Unit 34 Metropolitan Centre, 3
Taunton Road, Greenford,
Middlesex UB6 8UQ, England
Sales and service
Phone +44-20-8813-1666
Fax +44-20-8813-1777
Email : [email protected]
SPECIFICATIONS
Applicable batteries NP-23dx, NP-1dx, NP-H50, NP-H50dx
BP-95dx or equivalent
(Batteries in the range: 12~13.2v 1~7Ahr)
Weight:………………....………………………………….…….1.6Kgs
Dimensions…..………………….190mm(W) x 65mm(H) x 175mm(D)
Conditioning Charge current………………..…………….……..250mA
Quick Charge Current…………………….…….…………....…...1.85A
Discharge Current……..………………….…….…………..…..….2.0A
Discharge Cutoff……………….……………….……..….……....10.8V
Trickle Charge Current………….………….………..….…….…..30mA
Input Voltage...……………….…...AC100~240V (50/60Hz) Automatic
Charge Control System………..……...…….Full Digital Microprocessor
Negative Delta Voltage (-
∆V)