IDX SD-1E - Manual

Revised
：2004.08.24
SD-1E
ENDURA POWER BELT /
DV ADAPTOR
SPECIFICATIONS
DC output : 1 channel (4 pin XLB2 connector)
Output voltage : 12~14.4V Pin No’s : 1 minus / 4 plus
: 7.2V Pin No’s : 2 plus / 3 minus
Discharge current : 12~14.4V Maximum 6.5A
7.2V Maximum 2A
Number of batteries to be used : Maximum 2 (2 in PowerLink mode)
Dimensions
: 67.5(W) x 106(H) x 34.5(D) mm approx
: 2.66(W) x 4.17(H) x 1.36(D) inches approx
Weight : Approx. 0.62 lbs.
APPLICABLE BATTERIES
E-50, E-80, E-50S, E-80S
CAUTION
Maximum discharge current when using 7.2V output voltage is 2A.
When powering 7.2V equipment be sure to follow XLR wiring instruction
i.e. For 7.2V Output Pin No’s : 2 = Plus & 3 = Minus
In Japan/Asia
IDX COMPANY LTD.
6-28-11 Shukugawara,
Tama-ku, Kawasaki-Shi,
Kanagawa-ken 214-0021,
Japan
Sales and service
Phone +81-44-850-8801
Fax +81-44-850-8838
E-mail [email protected]
In the United States
IDX System Technology
1602 Lockness Place,
Torrance, CA 90501 USA
Sales and Service
Phone +1-310-891-2800
Fax +1-310-891-3600
E-mail [email protected]
In Europe/Middle East
IDX Technology Europe Ltd.
Unit 34 Metropolitan Centre,
3 Taunton Road, Greenford,
Middlesex UB6 8UQ, England
Sales and service
Phone +44-20-8813-1666
Fax +44-20-8813-1777
E-mail [email protected]