Hanns.G HW173 - Manual (Page 14)

User’s Manual
H-POSITION
Select the ψH-POSITIONωoption to shift the screen image to the
left or right. Enter the option and adjust the level. [For VGA
only]
V-POSITION
Select the ψV-POSITIONωoption to shift the screen image up or
down. Enter the option and adjust the level. [For VGA only]
CLOCK
Select the ψCLOCKωoption to reduce the vertical flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
PHASE
Select the ψPHASEωoption to reduce the horizontal flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
SHARPNESS
Select the ψSHARPNESSωoption to adjust the sharpness of the
display. Set the value from -2 to 2.
HDMI MODE
Transferring audio-video image by HDMI port would
cause edges of the image being cut on the screen; select
ψPC
Mode ωto display in full screen. Enter the option and select
ψVIDEO Modeω(VIDEO) or ψPC Modeω(PC). [For HDMI
Input only]
OSD SETTING
LANGUAGE
Select ψLANGUAGEω option to change the language of the
OSD. Enter the option and select a language. [Reference only,
the OSD Language depends on the selected model]
H-POSITION
Select ψH-POSITIONωoption to adjust the horizontal position of
the OSD. Enter the option and adjust the level.
V-POSITION
Select ψV-POSITIONωoption to adjust the vertical position of
the OSD. Enter the option and adjust the level.
TRANSPARENCY
Select ψTRANSPARENCYωoption to adjust the transparency of
the OSD. Enter the option and adjust the level.
OSD TIME-OUT
Select ψOSD TIME-OUTωoption to set the OSD time out from
10 to 100 seconds. Enter the option and adjust the level.
OSD COLOR
To choose the color combination of the OSD window, select
ψOSD COLORωoption under ψOSD SETTINGωmenu, choose
modes 1/2/3.
SYSTEM
DDC/CI
Select the ψDDC/CIωoption to switch the function On or Off.
[Dual input mode optional]
14