Hanns.G HS233 - Manual (Page 13)

User’s Manual
13
FRONT PANEL CONTROL
 Power Button:
Press this button to switch ON/OFF of monitor’s power.
 Power Indicator:
Blue — Power On mode.
Orange — Power Saving mode.
 MENU:
1. Turn the OSD menu on.
2. Enter sub menu when OSD menu is ON.
 Adjust ▲▼:
1. Invalid when the OSD menu is off.
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
 【 i 】Button:
1. Press this button will start 「Auto Adjust」 function when the OSD menu is off. (The auto
adjustment function is used to optimize the 「horizontal position」, 「vertical position」, 「clock」,
and「phase」).
2. When the OSD menu is off , press this button for 5 seconds to select one of the following input
source 「VGA」,「DVI」,「HDMI」.
3. Exit current menu when OSD is ON.
 Hotkeys:
1. Power Lock and Unlock:
Press the【MENU】and【▼】keys at the same time for 10 seconds to lock or unlock the power
button.
2. OSD Lock and Unlock:
Press the【MENU】and【▲】keys at the same time for 10 seconds to lock or unlock OSD
buttons.
NOTES:
 Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a
place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
 Save the original shipping box and packing materials, as they will come in handy if you ever have
to ship your monitor.
 For maximum protection, repackage your monitor as it was originally packed at the factory.
 To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be
removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.