BT INSPIRE 1500 - Manual (Page 47)

47
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email [email protected]
Registration of an additional handset when base
PIN changed (i.e. if PIN changed from default setting of 0000)
At the handset:
1 . Press
Menu
, scroll
to Settings
and press
OK
.
2 . Scroll to
HS Settings
and press
OK
.
3 . Scroll or to
Register
and press
OK
.
4 . Press or to select the base you want (1-4). You should
only select a base that has a
*
displayed beside it. Press
OK
.
5 . Enter the 4-digit system PIN then press
OK
. The display shows
Overwrite the registration on Base x?
Press
Yes.
6 .
Press and Hold Base Find Key
is displayed, press
OK
on the
handset to commence registration.
At the base:
1 . Press and hold for approximately 8 seconds until it
beeps and then release. Press
OK
on the handset to confirm.
The base will go into registration mode for 90 seconds and
will then beep if registration is successful. The handset will
automatically be assigned the next available handset number.
Internal calls
Call another handset
If you have more than one handset registered to the base, you can
make internal calls between two handsets.
1 . Press and if you have one other handset it will ring. If
you have other handsets, press or to select the
handset (1-5) you want to call, then press
OK
.