BT INSPIRE 1500 - Manual (Page 27)

27
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email [email protected]
Handset ringing priority
1 . Press
Menu
, scroll
to Settings
and press
OK
.
2 . Scroll
to BS Settings
. Press
OK
.
3 . Scroll
to Ring Priority
. Press
OK
.
4 .
All Handsets
is highlighted. Press
OK
for all handsets to
ring together.
Or
Scroll
to Select Handset
. Press
OK
then press
or
to select the handset you want to ring first. Press
OK
.
The ring delay option is highlighted. Press or to set
the number of rings before the other handsets ring. Press
OK
.
5 . Press
Back
to return to the previous menu.
Recall mode
1 . Press
Menu
, scroll
to Settings
and press
OK
.
2 . Scroll
to BS Settings
. Press
OK
.
3 . Scroll
to Recall Mode
. Press
OK
.
4 . Press or to select
Timed Break
or
Earth
and
press
OK
.
System PIN
1 . Press
Menu
, scroll
to Settings
and press
OK
.
2 . Scroll
to BS Settings
. Press
OK
.
3 . Scroll
to System PIN
. Press
OK
.
4 . Enter the old PIN (default setting 0000) and press
OK
.
5 . Enter the new PIN and press
OK
. Re-enter the new PIN and
press
OK
. Press
Back
to return to the previous menu level.
When you have more than one
handset registered to your base, you
can set one handset to ring before the
others. This allows one handset user
to answer all incoming calls first, like
a receptionist.
Choose
All Handsets
if you want
all handsets to ring at the same time
or
Select Handset
to nominate a
handset to ring before the others.
Ring delay options; 2, 4, 6 or 8 rings.
The System PIN is used when
changing certain settings and
registration / de-registration.
The default setting is 0000.
You can change this to your
own preferred 4-digit number.
If you make a mistake, press
Clear
to delete digits.
The System PIN is also used as your
Remote Access PIN. See page 39 for
more information on Remote Access.
Earth and Timed Break are settings
for switchboard use. If in doubt
please contact your switchboard
service provider.