Page 14, Troubleshooting – Blizzard Lighting 252 ToughSTORM (Rev A) User Manual
Page 14
Page 14
ToughSTORM™ 252 Manual - Rev. A
Copyright (c) 2012 Blizzard Lighting, LLC
Troubleshooting
Symptom
Solution
Beam is Dim
Check optical system and clean excess dust/grime. Also ensure that
the 220V/110V switch is in the correct position, if applicable.
No Light Output
Check to ensure fixture is operating under correct mode, IE auto/
DMX/Etc., if applicable. Contact service for more information.
Chase Speed Too
Fast/Slow
Check to ensure proper setup of speed adjustment.
No Power
Check fuse, AC cord and circuit for malfunction.
Blown Fuse
Check AC cord and circuit for damage, verify that moving parts are
not restricted and that unit’s ventilation is not obstructed
Fixture Not
Responding /
Responding Er-
ratically
Make sure all connectors are seated properly and securely.
Use Only DMX Cables.
Install a Terminator.
Check all cables for defects.
Reset fixture(s).
If your problem isn’t listed, or if problems persist,
please contact support: [email protected].
DMX Values In-Depth (9-Channel Mode)
Channel
Value
What It Does
1
000 <--> 255 First Red Pixel Intensity (0% <--> 100%)
2
000 <--> 255 First Green Pixel Intensity (0% <--> 100%)
3
000 <--> 255 First Blue Pixel Intensity (0% <--> 100%)
4
000 <--> 255 Second Red Pixel Intensity (0% <--> 100%)
5
000 <--> 255 Second Green Pixel Intensity (0% <--> 100%)
6
000 <--> 255 Second Blue Pixel Intensity (0% <--> 100%)
7
000 <--> 255 Third Red Pixel Intensity (0% <--> 100%)
8
000 <--> 255 Third Green Pixel Intensity (0% <--> 100%)
9
000 <--> 255 Third Blue Pixel Intensity (0% <--> 100%)
DMX Values In-Depth (5-Channel Mode)
Channel
Value
What It Does
1
000 <--> 255 Dimmer (0% <--> 100%)
2
000 <--> 255 Red Intensity (0% <--> 100%)
3
000 <--> 255 Green Intensity (0% <--> 100%)
4
000 <--> 255 Blue Intensity (0% <--> 100%)
5
000 <--> 255 Strobe (Slow <--> Fast)
DMX Values In-Depth (3-Channel Mode)
Channel
Value
What It Does
1
000 <--> 255 Red Intensity (0% <--> 100%)
2
000 <--> 255 Green Intensity (0% <--> 100%)
3
000 <--> 255 Blue Intensity (0% <--> 100%)