Blizzard Lighting AW RockLite (Rev B) - Manual (Page 12)

Page 12
ROCKLITE AW Manual Rev. B © 2010-14 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with
DMX, please read the DMX Primer on page #15.
1.) The ROCKLITE RGBW is capable of operating with either 4 or 8 DMX chan-
nels. To use the fixture in 4-channel mode, use the
d001
on the LED Readout.
2.) To operate the fixture in 8-channel mode, use the
A001
on the LED Readout.
Stand-Alone, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable
speeds.
1.) To set the fixture in Flash/Fade mode, select
FF01-FF99
(Fade Mode,
slowest to fastest) or
CC01-CC99
To confirm, press the button.
2.) To use the fixture in demo mode, select
dEoo
, then press the
button to confirm.
3.) Each fixture is a master by default. To set the fixture as a slave, use the
SLAv,
then press the button to confirm.
Sound Acitve Mode:
1.) To use sound active mode, select either
SouD
.
2.) Press the button to confirm.
Manual Mode (Color Preset Mode):
Allows a single unit to display a variety of colors without a DMX controller.
1.) Reach the manual adjustment by using the
b001.
Adjust each color by using the , and
buttons to select
r001-r255
,
g001-g255
,
b001-b255
or
u001-
u255
(Amber Segment #1, White Segment #1, White segment #2, and Amber
Segment #2, respectively), and adjusting between 1 (lowest) and 255 (highest)
for each color.
To confirm, press the button.