AJA HDP2 - Manual (Page 10)

10
This allows you to select a desired Mini-Converter when there are more than one.
Selecting a Mini-Converter with this dropdown menu causes this application to
connect to the selected converter. The type of Mini-Converter and serial number will
be shown in the graphic and text below it.
A status field at the bottom of the screen shows whether you are connected and
communicating with the Mini-Converter shown using Mini-Config.
When configuring the HDP2 Mini-Converter, select it from the top pulldown, view the
current settings and change any values. Making a change communicates that new
value to the Mini-Converter’s non-volatile memory.
Tabbed Screens The Tabs delineate groups of controls for each type of task to be performed.
Mini Config, Tabbed Screens
The controls for the actual configuration parameters are specific to each Mini-
Converter type. Click on any of the tabbed buttons (Video/Audio/Update/Info) and
the screen below will change to match. Each of these screens are described on the
following pages.
Video Tab Screen The selections on this screen configure the output video. In all cases, selecting “Auto”
allows the HDP2 to conform the output to best serve the attached monitor. This is
handled automatically when the HDP2 reads the capabilities indicated by the
attached monitor.
Mini Config, Video Tab Screen
Tabbed screens