Bayer HealthCare Blood Glucose Meter MODEL Ascensia Elite - Manual (Page 48)

39
3 Then quickly turn the Meter
back over (display is blank),
remove and reinsert strip within
10 seconds. on is displayed.
Immediately pull the strip out
within 2 seconds. off is dis-
played. The alarm is now off.
To turn the alarm back on,
repeat this procedure (#1-2-3).
The Display sequence is
reversed, off appears first and
then on.
Specifications
(continued)
SECTION 7
2 Turn the Meter over and
open and shut the battery
door.
TURNING OFF THE
ALARM:
We strongly advise you to
leave the alarm on, as it
helps tell you when the
Test Strip is adequately
filled with blood or con-
trol solution. However,
you can operate your
Meter discreetly by turn-
ing off the alarm.
MATERIALS REQUIRED:
Ascensia E
LITE ™ Check
Strip or Test Strip (both
strips will work).
1 Insert Check or Test Strip
fully into Meter.