Bosch VG4-200 - Manual (Page 19)

AutoDome Modular Camera System On-Screen Display Menu Navigation | en 15
Bosch Security Systems, Inc. VG4-200, VG4-300, VG4-500i Series User’s Manual F01U064036 | 1.1 | 2007.01
2.6 Communication Setup Menu
The Communication Setup Menu provides access to baud rate and Bilinx control settings.
Menu items with an * are the default settings.
Communication Setup Menu Choices:
Communication Setup
Exit...
* AutoBaud: ON
* Baud Rate 9600
* Bilinx: ON
Restore Defaults...
* = Factory Setting
Focus / Iris: Select
Menu Description Sub-menu / Description Default
Setting
Exit Saves and exits the menu.
AutoBaud Turns AutoBaud detection on. Toggles ON or OFF.
ON automatically accepts baud rates
from 2400 to 57600.
(Note: If stepping from 2400 to 57600,
you must first set the controller to 19200
for AutoBaud to detect the higher baud
rate.) ON
Baud Rate Manually sets the baud rate when Auto-
Baud is set to OFF. Choices are 2400, 4800, 9600, 19200,
38400, and 57600. Then follow the OSD
to confirm the selection. 9600
Bilinx Turns on Bilinx control communication,
(Only available when not connected to a
Bilinx data interface unit). Toggles ON or OFF. ON
i
NOTICE! Bilinx protocol is not available on IP cameras.