KV2 Audio ESR212 - Manual (Page 17)

Drawing
ESR212
Drawing
17
The three-way, mid / high loudspea-
ker system shall incorporate two
12-inch mid-bass (MB) transducer a
6-inch mid range (MR) speaker and
a 1-inch exit compression driver
high frequency (HF) transducer. The
LF drivers shall be mounted above
and below mid / hi horn tuned for
optimum mid-bass response and
dispersion. The HF and MR transdu-
cers shall be loaded on a rotatable,
integrated, constant directivity
mid/high horn assembly. The system has a nominal coverage
pattern of 90° (horizontal) x 40°
(vertical). The loudspeaker enclosu-
re shall have a rectangular shape
and shall incorporate, two top
handles. Enclosure incorporates
M10 suspension points, three M10
suspension points on the top, three
M10 on the bottom and one M10
suspension point on the back. The
speaker cabinet shall be finished
with an ultra wear resistant black
polymer coating and fitted with a
weather resistant perforated steel
grill. The system shall receive power
from a separate ESR2800 Amplifer. ESR2800 Amplifier - Controller
module consisting of separate
power amplifiers for high, midran-
ge and midbass transducers as
well as signal processing including
electronic band pass crossover
filters, phase alignment, time
correction, equalization and
speaker protection. The speaker
system shall connect to the
Amplifier/Controller Module via
proprietary cables terminated in
Amphenol AP-6 connectors. The
three-way mid / high loudspeaker
system shall be the KV2 Audio
ESR212.
ESR212 Architects and Engineer’s
Specifications