Brother HL-3260N - Manual (Page 205)

CHAPTER 5 MAINTENANCE
5-17
!
Cleaning the Friction pad
If the Friction pads are dirty, the printer may feed multiple pages or paper
jam. In this case, clean the Friction pads of each paper tray. Follow these
steps to clean the Friction pads in standard Paper tray 2.
☛ ☛ ☛ ☛ 1.
Turn off the printer power.
☛ ☛ ☛ ☛ 2.
Slide Paper tray 2 out until it stops.
ZAEY012E
Fig. 5-32
☛ ☛ ☛ ☛ 3.
Wipe the top of the Friction pad with a dry cloth.
ZAEY017E
Fig. 5-33
✒ ✒ ✒ ✒
Note
• Do not wipe with a wet cloth, alcohol or cleanser.
☛ ☛ ☛ ☛ 4.
Slide Paper tray 2 into the slot slowly until it stops.
☛ ☛ ☛ ☛ 5.
If 2000 Sheets paper tray (LT-5200) is installed, clean the Friction pads of
Paper tray 3 or Paper tray 4 following the steps for Paper tray 1 and Paper
tray 2.