Connecting the display to your macintosh computer, Connecting the power cord – Apple AppleVision 1710AV User Manual
Page 22
Connecting the display to your Macintosh computer
Follow these steps to connect the AppleVision 1710
AV
Display to your
computer.
IMPORTANT
Before you connect any cords or cables, make sure your computer
is turned off and unplugged.
Connecting the power cord
1
Connect the socket end of the power cord to the power cord receptacle on the back of
the display.
WARNING
This equipment is intended to be electrically grounded. Your
display may be equipped with a three-wire grounding plug—a plug that
has a third (grounding) pin. This plug will fit only a grounded AC
outlet. This is a safety feature. If you are unable to insert the plug into
the outlet, contact a licensed electrician to replace the outlet with a
properly grounded outlet. Do not defeat the purpose of the grounding
plug!
8
Chapter 1