Apple Multiple Scan 15 Display - Manual (Page 12)

3 Slide the base forward to lock it in place.
Push the base forward about 1/4 inch toward the front of the monitor to seat
it. A release latch on the monitor bottom will click to fasten the base in place.
With the base now attached, turn the monitor upright so that it sits upon
the base.
If you should ever need to remove the base, press the release latch on the
monitor and then gently pull the base toward the rear of the monitor until you
can withdraw the tabs from the monitor.
Positioning the monitor
Once your monitor is in place, either on top of your computer or next to it
on a desk or table, follow these steps:
1 Place the monitor so that the screen faces the user.
2 To slide the monitor, lift the front up slightly and push or pull in the direction you want.
3 Adjust the viewing angle of the monitor by tilting it up or down and turning it left or right
on its stand.
Position the monitor so that when you use it, no bright light is behind the
monitor or reflected on the screen. Your eyes should be about level with the
top edge of the screen and between 18 and 28 inches (45 to 70 cm) away. Take
occasional breaks when using your computer, to focus your eyes on a distant
object.
6 Chapter 1