Heater Craft G200X - Manual (Page 3)

Page 2
Safety Guidelines and Definitions
These instructions contain information that is important for you to know and understand. The
information provided relates to safety issues for the installation and use of our products. To
help you identify important information, we use the following system.
WARNING –
Important Safety information – A hazard that may cause an injury, serious injury, or loss of life.
CAUTION –
Information for preventing improper operation of, or damage to equipment.
NOTE –
Information pertaining to the installation, operation, and/or maintenance of this product that
you should pay special attention to.
NOTICE –
Information informing you of the guidelines of these instructions.
Save these instructions! They contain information pertaining to the safety, care, installation,
use and warranty of this product.
Recommendations
NOTICE – Heater Craft will not be held liable for any accidental damage to persons and / or
property resulting from any installation not completed within the specified guidelines stated
herein.
1. Review Heater Craft installation instructions and warranty information completely before
beginning installation.
2. Heater Craft recommends the use of a volt meter to test your battery connections to
determine the proper voltage before making any wiring connections.
3. Lay out the heater system before beginning installation to be sure the mounting location of
the heater unit, as well as the routing of the wire harness will be sufficient.
NOTE– The heater unit is equipped with an adjustable bracket for versatile mounting situations.
4. The heater wiring harness between the batteries and the heater unit should be routed away
from moving parts and secured from sharp objects or edges in such a manner so as to prevent
any chafing of pinching which may damage the wire insulation.
5. Application may vary! If you have any questions or suggestions regarding your Heater Craft
product, contact Heater Craft customer service at (208) 687-4400.