BenQ Z2 - Manual (Page 42)

26 Using Your Phone
Listening to Voicemails
Long-press to dial the voicemail phone number and listen to your
voicemails.
If the network vendor supports it, the voicemail icon will appear on the
display when you have new voicemails.
If the voicemail number is not stored in the memory, you will not be
able to access your voicemail by long-pressing . In this case, you
will need to manually set the number by going to Messages >
Voicemail > Set Number.
Voice Dialing
1. In the idle mode, push the joystick up and hold.
2. After a beep, when the display shows "Recording … ", say the voice
dialing prompt for the number you wish to dial. Once the phone has
correctly identified the contact associated with this voice dialing
prompt, two situations may occur:
a. If there is only one phone number identified, your phone will
automatically dial this number.
b. If there are two or more phone numbers stored for the contact
identified, scroll to the number you wish to dial, and press
to make the call.
To use voice dialing to make a call, you must have already stored a
voice dialing prompt for the desired number in Phone Book. For
details, see page 31, "Adding Contacts to the Phone Book".