Baracoda BRR-L - Manual (Page 6)

RoadRunners BRR-L & BRR-LA Programming guide Nov 2007
© Baracoda 2007 6/29
2.3.4/ Timestamp Option
Time stamp can be configured (ON/OFF, set new date and new time) by the following configuration barcodes
Timestamp on
Timestamp off (*)
Set Timestamp END of configuration
Noted that the timestamp must fit the specific following format:
{YY} {MM} {DD} {HH} {MM} {SS}
The setting is made by scanning the 0-9 labels (Appendix 1) as on a calculator; following the timestamp format
shown above.
Read « Set Timestamp » label
START
Read intermediary label
Corresponding to the next digit to set for the
Timestamp (from Appendix 1)
Finished ? (1)
Read « END of config » label
END
NO
YES
Programming procedure for “set Timestamp” option.