Baracoda BRR-L - Manual (Page 19)

RoadRunners BRR-L Programming guide dec 2006
© Baracoda 2006 19/29
3.10/ Code 128 Settings
3.10.1/ General
Code 128/EAN 128 - not active
Code 128/EAN 128 – active (*)
Code 128/EAN 128 - barcode length - any length (*)
Code 128/EAN 128 - barcode length - minimum
length = 6
3.10.2/ EAN 128: Group Separator
‘FNC1’ included in an EAN128 code is transmitted by default as ‘GS’ (Group Separator – 0x1D).
(Feature enablde for CPU firmware version > 3.00)
Enable GS transmission (*)
Disable GS transmission
It is possible to replace that ‘GS’ data to an other ASCII data.
(Feature enabled for CPU firmware version > 3.00)
Define GS End of configuration
Read « define GS » label
START
Read intermediary label
Corresponding to the next character to set for the
replacing data of GS
Finished ?
Read « END of config » label
END
NO
YES