Blaupunkt Wiesbaden CD51 - Manual (Page 23)

48
Switching the equalizer on/off
In order to switch on the equalizer,
➮
hold down the EQ
<
button until
DEQ lights up on the display and
“EQ ON” appears briefly.
To switch off the equalizer,
➮
hold down the EQ
<
button until
DEQ goes out on the display and
“EQ OFF” appears briefly.
Setting the equalizer
➮
Press the EQ button
<
.
“LOW EQ” appears on the display.
➮
Select between “LOW EQ” and
“HIGH EQ” by pressing the or
button
:
.
➮
Press the or button
:
.
➮
To select the frequency, press the
button
:
.
➮
Set the level using the or but-
ton
:
.
➮
To select the next filter, first press
the OK button
;
, then the or
button
:
.
➮
When all the settings have been
selected, press the EQ button
<
.
Setting the level indicator
The level indicator (spectrometer) on
your display briefly indicates the volume,
tone and equalizer settings with sym-
bols on your display as you make the
corresponding settings.
When settings are not being made, the
spectrometer indicates the original lev-
el of the car radio.
You can also set the type of spectromet-
er on your menu.
There are two types available.
Selecting a spectrometer type
➮
Press the MENU button
8
.
“MENU” appears on the display.
➮
Press the or button
:
re-
peatedly until “EQ DISPLAY” ap-
pears on the display.
➮
Press the or button
:
to
choose between displaying
“SPECTRUM 1” and “SPECTRUM2”
or “EQ DISP OFF” set the volume
distribution left/right.
➮
Press the MENU button
8
or OK
;
once you have completed the
setting.
EQUALIZER