Blaupunkt Wiesbaden CD51 - Manual (Page 22)

47
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Switching loudness on/off
Loudness means the bass and treble
are increased to a comfortable level at
lower volume levels.
➮
Press the AUD / LD
=
button for
approx two seconds.
When loudness is activated, LD lights
up on the display.
Setting the loudness intensity
The loudness level can be raised in
steps of one to six.
➮
Press the MENU button
8
.
“MENU” appears on the display.
➮
Press the or button
:
re-
peatedly until “LOUDNESS” ap-
pears on the display.
➮
Press the or button
:
to set
the desired volume increase.
➮
Press the MENU button
8
or OK
;
once you have completed the
setting.
Equalizer
This car radio is fitted with a parametric
digital equalizer. In this case, paramet-
ric means that for each of the 2 filters,
one frequency can be individually raised
or lowered (GAIN +7 to - 7).
The following filters are available:
●
LOW EQ 60 - 100 Hz
●
HIGH EQ 10 000 - 17 500 Hz
These filters can be set without meas-
uring equipment. This means that the
sound quality inside the vehicle can be
greatly influenced.
Notes on adjusting the equalizer
We recommend you use a CD you are
familiar with when adjusting the equal-
izer.
Before adjusting the equalizer, set the
tone and volume balance to zero and
deactivate the loudness function. To do
this, please see the chapter “Tone and
volume balance”.
➮
Listen to the CD you have chosen.
➮
Evaluate the tone impression ac-
cording to your taste.
➮
Now consult the chart “Sound im-
pression” section of “An aid to ad-
justing the equalizer”.
➮
Set the equalizer values as de-
scribed under “What to do”.
LOUDNESS EQUALIZER