beautypg.com

Vehicle installation, Step 6: connect the audio, Option 1: aux in cable installation instructions – Audiovox ONYX User Manual

Page 20

background image

38

39

Vehicle Installation

Option 1: Aux In Cable Installation Instructions

1 Plug one end of the Aux In Cable into the green AUDIO connector

on the dock .

2 Plug the other end into

the auxiliary input jack
connection of your
vehicle’s stereo system .

3 Insert the dock into the

mount .

4 Insert your onyX into

the dock .

5 Power on your onyX by pressing the Power

button .

6 Be sure the vehicle is outside and the antenna

has a clear view of the sky . Verify that you are
receiving the XM signal . There should at least
be one bar on the lower left corner of the main

Step 6: Connect the Audio

To play audio through your vehicle’s stereo or FM radio, decide on one of the
following audio connection options:

• Option 1: Best: Use the Aux In Cable if your vehicle’s stereo system has an

auxiliary input connection . Refer to your vehicle’s owners manual to find
the location of the auxiliary input jack, or consult the vehicle dealer .

TIP! The auxiliary input jack may be located on the face plate of the vehicle
radio, on the back of the radio, anywhere on the front dash panel, inside the glove
compartment, or inside the center console in between the front seats .

• Option 2: Better: Use a Cassette Adapter if your vehicle has a built-

in cassette player . Cassette Adapters are sold separately and can be
purchased from an electronics retailer, or go to xmradio .ca/accessories .

• Option 3: Good: Use the PowerConnect feature in the onyX . PowerConnect

plays the audio through your vehicle’s FM radio .

• Option 4: Best: Use the FM Direct Adapter . If none of the previous three

audio connection options will work in your vehicle, then you will need to
use the FM Direct Adapter (FMDA) (sold separately) . The FMDA needs to be
installed by a professional installer and directly connects the onyX to your
vehicle’s FM radio .

Follow the installation instructions in the next several sections for the audio
connection option that you have selected .

AUDIO

ANT

PWR

FM OUT

2

3

4

5

6

7

8

9

0

direct

jump

FM

menu

1

2

3

4

5

6

7

8

9

0

direct

jump

FM

menu

1