Brother DCP8020 - Manual (Page 59)

GETTING STARTED 4 - 6
Setting the Tray Use for Copy mode
DCP-8020
The default setting of Auto allows your DCP to choose the optional
Tray #2 when paper is out in Tray #1 and when the size of the original
will fit best on the paper in Tray #2.
1
Press Menu , 1 , 5 .
2
Press or to select Tray#1
Only , Tray#2 Only , or Auto .
3
Press Set .
4
Press Stop/Exit .
DCP-8025D
The default setting of Auto allows your DCP to choose the optional
Tray #2 or the MP Tray when paper is out in Tray #1 and when the
size of the original will fit best on the paper in Tray #2 or the MP Tray.
1
Press Menu , 1 , 5 .
2
Press or to select
Tray#1 Only , MP Only , or
Auto .
—OR—
If you have the optional paper tray.
Press
or to select
Tray#1 Only , Tray#2 Only , MP
Only , or Auto .
3
Press Set .
4
Press Stop/Exit .
If your DCP is a DCP-8020 without the optional tray #2, you can
skip this setting.
15.Tray Use:Copy
▲ Tray#1 Only
Tray#2 Only
▼ Auto
Select ▲▼ & Set
15.Tray Use:Copy
▲ Tray#1 Only
MP Only
▼ Auto
Select ▲▼ & Set
15.Tray Use:Copy
▲ Tray#1 Only
Tray#2 Only
▼ MP Only
Select ▲▼ & Set