The factory settings are shown in bold with, 3 - 7 on-screen programming – Brother DCP8020 User Manual
Page 50
3 - 7 ON-SCREEN PROGRAMMING
If you installed optional LAN board (NC-9100h), the LCD shows
the following LAN menu. (See the Network User’s Guide on the
CD-ROM.)
Main Menu
Submenu
Menu
Selections
Options
Descriptions
Page
4
.
LAN
(option)
1
.
Setup
TCP/IP
1
.
BOOT Method
Auto
Static
RARP
BOOTP
DHCP
You can choose the
BOOT method that
best suits you needs.
See
Network
User’s
Guide
on the
CD-ROM.
2
.
IP Address
[000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3
.
Subnet Mask
[000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet
mask.
4
.
Gateway
[000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5
.
Host Name
BRN_XXXXXX
Enter the Host name.
6
.
WINS Config
Auto
Static
You can choose the
WINS configuration
mode.
7
.
WINS
Server
Primary
Secondary
Specifies the IP
address of the
primary or secondary
server.
8
.
DNS Server
Primary
Secondary
Specifies the IP
address of the
primary or secondary
server.
9
.
APIPA
On
Off
Automatically
allocates the IP
address from the
link-local address
range.
The factory settings are shown in Bold with .
to accept
to
exit
Press the Menu numbers.
(ex. Press 1, 1 for Paper Type)
—
OR
—
to select
to select