Barco RLM G5I PERFORMER R9010320 - Manual (Page 31)

3. Connections
Inputs
R G B H V VIDEO
RGBHV R G B H V -
RG
S
B R G
S
B - - -
RGBS R G B S - -
Component PR Y PB - - -
S-Video - - - - C Y
S-Video C - Y - - -
Composite VIDEO - - - - -
Composite - VIDEO - - - -
Composite - - VIDEO - - -
Composite - - - - VIDEO
Signals
Composite - - - - - VIDEO
Table 3-4
Extended configuration of the 5-cable input: the first column gives the possible signals, and the first row the 5 cable input connectors (+ the standard Video BNC).
How to set up the 5-cable extended configuration ?
1. Connect the video or S-video source to the desired BNC connector
Note: In some cases an adapter cable is required (image 3-12, image 3-13, image 3-14)
R/PR G/Y B/PB Hs/Cs Vs VIDEO
Chroma Luma
S-Video 2
S-VIDEO
Image 3-12
Connecting an S-Video signal on the Vs & Video BNC
Chroma Luma
S-Video 3
R/PR G/Y B/PB Hs/Cs Vs VIDEO S-VIDEO
Image 3-13
Connecting an S-Video signal on the R&B BNC
Video R Video G Video B Video VS Video
R/PR G/Y B/PB Hs/Cs Vs VIDEO S-VIDEO
Image 3-14
Connecting composite Video signals on the 5-cable input
Multiple video signals can not be visualized simultaneously since there is only one decoder.
3.10.3 S-Video extended configuration
What can be done ?
Beside the standard luminance (Y) and chrominance (C) signals, the advanced capabilities of the S-Video input make treatment of
additional signals possible:
• 2 composite video signal may be connected.
Inputs
Y C
S-Video Y C
Composite Video Video -
Signals
Composite Video - Video
Table 3-5
Extended configuration of the S-Video input: the first column gives the possible signals, and the first row the S-Video inputs pins.
R5976815 RLM G5I PERFORMER 02/06/2006 29