Barco E-2320 C (SE) - Manual (Page 65)

Display operation
65
Display operation
Operating precautions
Continuous operation of the display with the same image may result
in some image sticking on the LCD panel. Over 10 hours operation
with the same image content is not recommended.
Switching on DPMS on display and PC and activating a good screen
saver may decrease the risk of image sticking (image retention).
Stand-by switching
When the display is on and no on-screen display is visible, push
the control wheel at the front for a few seconds to switch the
display in stand-by. The LED turns orange.
When the display is in stand-by, push and hold the control
wheel to switch it back on. The LED turns green.
Figure 22
BARCO
Push and hold