Brother FAX-1355 - Manual (Page 70)

Chapter 12
60
Setup for delayed polling
receive
12
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
a
Make sure you are in Fax mode .
b
Press Menu, 2, 1, 7.
7.Polling RX
c
Press a or b to choose Timer.
Press OK.
d
Enter the time (in 24-hour format) you
want to start polling.
Press OK.
For example, enter 21:45 for 9:45 PM.
e
Enter the fax number you are polling.
f
Press Start.
The machine makes the polling call at
the time you entered.
Sequential polling
12
The machine can request documents from
several fax machines in one operation.
a
Make sure you are in Fax mode .
b
Press Menu, 2, 1, 7.
7.Polling RX
c
Press a or b to choose Standard,
Secure or Timer.
Press OK.
d
Do one of the following:
„ If you chose Standard, go to
step e.
„ If you chose Secure, enter a four-
digit number, press OK, go to
step e.
„ If you chose Timer, enter the time
(24-hour format) you want to begin
polling and press OK, go to step e.
e
Specify the destination fax machines,
which you wish to poll by using One-
Touch, Speed-Dial, Search, a Group or
the dial pad. You must press OK
between each location.
f
Press Start.
The machine polls each number or
group in turn for a document.
Press Stop/Exit while the machine is dialling
to cancel the polling process.
To cancel all sequential polling receive jobs,
see Checking and cancelling waiting
jobs on page 26.