beautypg.com

Preparing the subwoofer, Pioneer logo, Wall mounting the main unit – Pioneer HTP-SB300 User Manual

Page 9: Ø 10 mm, Installation 01

background image

Installation

01

9

En

English

Deutsch

Italiano

Español

Pyccкий

Français

Nederlands

Preparing the subwoofer

Attach the non-skid pads to the base of

subwoofer.
Use the supplied adhesive to attach four pads
to the base of subwoofer.

• The subwoofer has been designed for

normal use when placed on its side as
shown. If installing the subwoofer
vertically, affix the non-skid pads to the side
of the subwoofer as indicated in the
accompanying illustration.

Wall mounting the main unit

The main unit can be mounted on a wall if
desired. Before performing a wall mounting,
consult page 11 and complete the wiring
connections.

Caution

• Remember that the main unit is heavy and

that its weight could cause the screws to
work loose, or the wall material to fail to
support it, resulting in the unit falling.
Make sure that the wall you intend to
mount the unit on is strong enough to
support them. Do not mount on plywood or
soft surface walls. If you are unsure of the
qualities, consult a professional for advice.

• Pioneer is not responsible for any

accidents or damage that result from
improper installation, misuse or
modification of the product, or natural
disasters.

• Mounting screws and washers are not

supplied. Use screws suitable for the wall
material and support the weight of the unit.
Recommended dimensions are for a screw
4 mm in diameter and 50 mm long, with a
washer 10 mm in diameter.

Pioneer logo

For vertical installation

Ø 10 mm

Washer (not supplied):

Ø 4 mm

50 mm

maximum Ø 10 mm

Screw (not supplied):

HTP-SB300_SVYXCN_En.book 9 ページ 2009年10月23日 金曜日 午後1時58分