beautypg.com

Bluetooth connection menu operations, Bluetooth connection menu, Pairing from this unit – Pioneer AVH-X8500BT User Manual

Page 69: Connecting to a bluetooth device automatically

background image

Bluetooth connection
menu operations

If you are using a cellular phone that can be
connected via Bluetooth wireless technology,
we recommend that you use your phone to
search for this unit and establish a connection
between it and your phone. The PIN code is
set to

0000 as default. The product name for

this unit will display on your phone as the de-
vice name. For details, refer to Entering PIN
code for Bluetooth wireless connection on page
70.
For further details concerning the proce-
dures for establishing Bluetooth wireless con-
nections, refer to the instruction manual for
the phone.

Pairing from this unit

1

Press the home button to switch to the

home display.

2

Touch the Bluetooth key to open the

Bluetooth connection menu.

3

Touch Connection to select a device.

4

Start to search.

Starting to search.

While searching,

is displayed and when

available devices are found, the device names
or Bluetooth device addresses (if names can-
not be obtained) are displayed.

# If you want to switch between the device
names and Bluetooth device addresses, touch
the icon.

Switching between the device
names and Bluetooth device ad-
dresses.

# To cancel searching, touch Stop.
# If three devices are already paired,
Memory Full is displayed and pairing cannot be

performed. In such cases, delete a paired device
first. Refer to page 69.
# If no device can be found, Not Found is dis-
played. In such cases, check the status of the
Bluetooth device and search again.

5

Touch a device name to select the de-

vice you want to connect to.
While connecting,

Pairing is displayed. If the

connection is established,

Paired is displayed.

# If your device support SSP (Secure Simple
Pairing), six-digit number appears on the display
of this unit. Once the connection is established,
this number disappears.
# If the connection fails, Error is displayed. In
such cases, try again from the beginning.
# The PIN code is set to 0000 as the default, but
can be changed. Refer to Entering PIN code for
Bluetooth wireless connection on page 70.
# Once the connection is established, the de-
vice name is displayed.
Touch the device name to disconnect.
# If you want to delete a paired Bluetooth tele-
phone, display

Delete OK?. Touch Yes to delete

the device.

Deleting a paired device.

# Never turn the unit off while the paired
Bluetooth telephone is being deleted.

Connecting to a Bluetooth
device automatically

If this function is set to on, a connection be-
tween your Bluetooth device and this unit will
take place automatically as soon as the two
devices are less than a few meters apart.
Initially, this function is set to on.

1

Press the home button to switch to the

home display.

2

Touch the Bluetooth key to open the

Bluetooth connection menu.

En

69

Section

19

Bluetooth

connection

menu

Bluetooth connection menu