Blaupunkt ALABAMA DJ TOKYO RDM 169 - Manual (Page 34)

71
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
UPDATE Use this function to delete
CD names during CD and
changer operation to make
more storage capacity avail-
able for new discs. (See
“Deleting CD names with
DSC-UPDATE”).
To quit the DSC programming mode and
store the adjustment:
•
Press DSC.
(See the section on “Short
Additional Memory S.A.M.”).
If you remove the KeyCard
during the reading process,
“READ KC” will appear on
the display panel.
LED ON/OFF Here you can choose be-
tween LED ON or LED OFF.
With LED ON, the “ON”
knob will flash for extra anti-
theft protection when the
unit has been switched off
and the KeyCard removed.
PEAK ON/OFF
Switches the dynamic level
display for the volume on/
off.
TOM ON/OFFIf you have a second Key-
Card with a Turn-On Mes-
sage, you can switch off this
information with “TOM
OFF”. The factory setting is
“TOM ON”.
For more information refer
to “ KeyCard theft protection
system” - “Turn ON Mes-
sage (T.O.M.)”.
AUX ON/OFF (for Alabama DJ, Tokyo
RDM 169)
This menu item will not ap-
pear unless a CD changer
has been connected to the
system. The factory setting
is “OFF”.
If another system compo-
nent is connected to AUX,
this setting must be altered
to “AUX ON”.
LEARN KC To “train” a second Key-
Card.
Please read the information
in the section on “KeyCard
theft protection system” -
“Training a second Key-
Card”.
READ KC To read out the KeyCard
data.
The card supplied with the
radio is used to display the
model name, type number
(7 6 …) and the serial
number.
With the extra card it is pos-
sible to display data entered
by your specialised dealer.
DSC programming
Alab/Seatt/Tokyo gb 95%® 08.05.2002, 10:35 Uhr 71