Blaupunkt ALABAMA DJ TOKYO RDM 169 - Manual (Page 10)

47
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
For more information, refer to “DSC
programming, LED ON/OFF”.
@ KeyCard theft protection system
The KeyCard must be inserted before
the unit can be operated.
KeyCard
Inserting the KeyCard
Press
1 to unlock the operating pan-
el; it will fold down forwards.
Insert the KeyCard with the contact
points facing down (see illustration).
Lock the operating panel.
2
1
3
Perform these steps in the reverse or-
der to remove the KeyCard.
; CDC
Switches to changer operation (only if
a changer is connected).
If there is no changer, the system will
switch to AUX as long as AUX ON is
switched on in the DSC menu.
< CD
Switches to CD operation
= TU (TUNER)
Switches to radio operation. Switches
to the memory levels/wavebands FM I,
FM II, TS (Travelstore), MW and LW.
> CD insert
When the CD is inserted with the label
facing up, it will be automatically trans-
ported into the operating position. The
unit will automatically switch to CD
play.
? Visual theft protection
The following conditions must be ful-
filled before the light diode will flash as
a visual indication of theft protection:
The unit is switched off;
The operating panel is folded down;
The KeyCard has been removed;
The DSC menu settings is switched to
LED ON (factory setting).
Quick Reference
Make sure to read the information in
the section on “KeyCard theft protec-
tion system”.
A Eject
Press the CD eject button for approx.
2 seconds and the CD will eject.
For safety’s sake, the operating
panel must remain locked when
the vehicle is in motion.
When you leave the vehicle, un-
lock the panel and remove the
KeyCard to protect the equipment
against theft.
Alab/Seatt/Tokyo gb 95%® 08.05.2002, 10:34 Uhr 47