Brother HL-P2000 - Manual (Page 6)

vi
Shipment of the Machine
If for any reason you must ship your Machine, carefully package the
Machine to avoid any damage during transit. It is recommended that
you save and use the original packaging. The Machine should also be
adequately insured with the carrier.
Warning
When shipping the Machine, the DRUM UNIT assembly including the
TONER CARTRIDGE must be removed from the Machine and placed
in the plastic bag. Failure to remove and place it in the plastic bag
during shipping will cause severe damage to the Machine and will
VOID THE WARRANTY.
1 Remove the drum unit. 2 Place it in the plastic bag and seal the
bag completely.
3 Remove the AC cord, the
extention wire of the paper tray and
the document support from the
machine. Re-pack the machine.
See
“REPACKING THE MACHINE” in
Chapter 6.