Brother HL-P2000 - Manual (Page 55)

CHAPTER 7 TROUBLESHOOTING
7-3
✒ Note
If the machine does not operate as you expect it to, it is recommended
that you turn off the
power switch, wait a few seconds and then turn it
on again. If you still have problems, consult your dealer or our authorized
service representative.
Operator Calls for the Copying and Scanning Functions
If a recoverable error occurs, the machine shows “E” on the display.
To clear the error, press the Stop Button.
An error will occur when the following happens;
* When the document causes a paper jam in the document feeder while the
machine is feeding the document.
* When the machine is busy. (When the machine is being used as a scanner
or printer.)
* When there is no paper in the sheet feeder.
*When memory full happens.