AEG BP7304021M - Manual (Page 12)

7. When the meat is at the set core
temperature, the symbol for the core
temperature and the core tempera-
ture sensor flash. An acoustic signal
sounds for two minutes. Press a but-
ton to stop the signal.
8. Remove the plug of the core tem-
perature sensor from the socket .
Remove the meat from the appli-
ance.
9. Deactivate the appliance.
Every time you put the core tem-
perature sensor in the socket,
you need to set the duration and
end time again.
When the appliance calculates
the provisional duration time for
the first time, the symbol - flashes
in the display. When the calcula-
tion ends, the display shows the
duration of the cooking. Calcula-
tions run in the background dur-
ing the cooking and the duration
value in the display is updated if
necessary.
You can change the core temperature
at any time during the cooking:
1. Press the temperature button :
– One time - the display shows the
set core temperature which
changes every 10 seconds to the
current core temperature.
– Two times - the display shows the
current oven temperature which
changes every 10 seconds to the
set oven temperature.
– Three times - the display shows
the set oven temperature.
2. Use the knob for the temperature to
change the temperature.
7.2 Inserting the oven accessories
The deep pan and the wire shelf have
side edges. These edges and the shape
of the guide-bars are a special device to
prevent the cookware from slipping.
12 www.aeg.com