Audio-Technica ATR2500-USB - Manual (Page 6)

6
(Service Pack 2; other operating systems may vary slightly)
1. Plug the free end of the USB cable into the USB port on your computer. The microphone’s blue
LED will illuminate, indicating the mic is receiving power. Your computer will automatically
recognize the USB device and install a driver.
2. In the lower right portion of your screen you may see a message that new hardware was found;
or you may see a driver software installation notice.
3. To select the ATR2500-USB as your default recording device, begin at your Start menu.
Select Control Panel .
Preliminary setup with Windows XP