Konica Minolta bizhub C754 - Manual (Page 19)

Scanning 5
TWAIN driver 5-1
5 Scanning
This chapter explains how to scan an original document. You can use one of
the following two methods to scan an original document.
2
Note
Before you perform this procedure, make preparations for scanning. For
details, see "Preparing to Scan" on page 4-1.
2
Note
When the file size for the original that you're scanning exceeds 200 MB,
a confirmation message appears.
When this happens, follow the instructions in the message, and adjust
the resolution, scan area, or scan type to reduce the file size.
If you scan the document without changing the settings, it is possible that
the document will not be scanned correctly or that it will take a long time
for the document to finish scanning.
Scan without checking the
document We recommend that you use this option when you
are in a hurry, when you already know what the set-
tings are, or when you intend to make adjustments in
the image processing application after you scan the
document. p. 5-2
Check, adjust, and scan
the document We recommend that you use this option when you
do not intend to adjust the image in the image
processing application after you scan it.
2
Note
You cannot use this option with an ADF.
p. 5-4