Konica Minolta bizhub 754 - Manual (Page 33)

bizhub 754/654 2-17
2.3 Preventing Unauthorized Access 2
3
Touch [Prohibited Functions When Authentication Error].
4
Touch [Mode 2].
% Select [Mode 2] when the Enhanced Security Mode is set to [ON]. Selecting [Mode 1] will cancel the
Enhanced Security Mode.
% Set three times or less when the Enhanced Security Mode is set to [ON]. Setting four times or more
will cancel the Enhanced Security Mode.
% To change the check count, touch [+] to increase the count or [-] to decrease it.
5
Touch [Release Time Settings].
6
Touch [C] and, from the keypad, enter the time, after the lapse of which the access lock state of the
Administrator Settings is canceled.
% Touch [Display Keypad] to display the keypad.
% Release Time can be set to any value between 1 min. and 60 min. in 1-min. increments. An input
data error message appears when any value falling outside the range of 1 to 60 min. is set. Enter
the correct Release Time.
% Set 5 min. or more when the Enhanced Security Mode is set to [ON]. Setting 1 to 4 min. will cancel
the Enhanced Security Mode.
7
Touch [OK].