Konica Minolta bizhub 754 - Manual (Page 127)

bizhub 754/654 3-4
3.1 User Authentication Function 3
5
Touch the keyboard icon in the [Account Name] field.
6
Enter the Account Name and the Password from the keyboard.
% Touch [C] to clear the value entered.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the previous screen.
7
Touch [OK].
8
Touch [Access] or [Login].
% If a wrong Account Name is entered, a message that tells that the authentication has failed appears.
Enter the correct Account Name.
% If a wrong Account Password is entered, a message that tells that the authentication has failed ap-
pears. Enter the correct Account Password.
% If the Enhanced Security Mode is set to [ON], the entry of a wrong Account Password is counted as
unauthorized access. If a wrong Account Password for the corresponding Account Name entered
is entered a predetermined number of times (once to three times) or more set by the administrator
of the machine, a message appears that tells that authentication has not been successful for any
subsequent operation for authentication. The machine is then set into an access lock state, rejecting
any more logon attempts.
To cancel the access lock state, the administrator of the machine must perform the Release Setting.
Contact the administrator of the machine.