Konica Minolta bizhub 421 - Manual (Page 13)

Network Configuration 4
AU-211P 58
!
Detail
When registering multiple Active Directory services, specify the default
Active Directory previously. Select the desired Active Directory on the
External Server Settings screen, and press [Set as Default].
Troubleshooting Tip:
Use the Ping Confirmation option to confirm the IP Address and the Host
Name, refer to page 60
4.0.3 Syncronizing the MFP Time with an NTP Server
You cannot log into Active Directory if the MFP system time is extremely
different between the MFP and Active Directory. Syncronize the MFP time so
it matches the Active Directory time with the system time.
Time Adjustment Setting
On the MFP control panel, press the [Utility/Counter] key, and then
[Administrator Settings] - [Network Settings] - [Forward] - [Detail Settings] -
[Time Adjustment Setting].
% Select ON to activate the Time Adjustment Feature.
% Select Host Address and enter the NTP server IP Address.
% Proceed to Date/Time Settings.
Server Type Select Active Directory, and specify its default domain
name (up to 64 characters).
Item Description
Item Description
ON/OFF Select [ON].
Host Address Specify the host address of the NTP server associated
with Active Directory.