Airlink101 AR580W3G User Manual
Page 99
89
Please click ‘Continue’ to back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please
wait for about 30 seconds while the router is rebooting).
If you want to reset all settings in this page back to previously-saved value, please click
‘Cancel’ button.
3-2-5 UPnP Setting
This function enables network auto-configuration for peer-to-peer communications, with
this function, network devices will be able to communicate with other devices directly,
and learn about information about other devices. Many network device and applications
rely on UPnP function nowadays.
Please click ‘NAT’ menu on the left of web management interface, then click ‘UPnP’, and
the following message will be displayed on your web browser:
There is only one option in this page, please select ‘Enable’ or ‘Disable’ to enable or
disable UPnP function, then click ‘Apply’ button, and the following message will be
displayed on your web browser: