Airlink101 AR580W3G User Manual

Page 27

If you want to go back to previous step, please press ‘Back’ button on the bottom of this

page.

3. Basic Setting

Here are descriptions of every setup items:

Wireless Module (1): Display the Wireless Module: Enable (default).

Band (2):

Please select a Band type from the dropdown list of ‘Band’, It

allows you to set the AP fix at 802.11b or 802.11g or 802.11n

mode. You also can select B+G or B+G+N mode to allow the AP

select 802.11b, 802.11g and 802.11n connection automatically.

NOTE: Some service providers use ‘DHCP’ (Dynamic Host

Configuration Protocol) to assign IP address to you. In this case, you

can choose ‘Cable Modem’ as Internet connection type, even you’re

using another connection type, like xDSL. Also, some cable modem

uses PPPoE, so you can choose ‘PPPoE xDSL’ for such cable modem

connection, even you’re using a cable modem.

2
3