Airlink101 ASW324V2 - Manual (Page 7)

6
Installing the Switch
The site where you place the Switch may greatly affect its
performance.
2.1 Installation
Please follow the guidelines below to install the Switch:
• Please install the Switch in a fairly cool and dry place.
Please refer to the Technical Specifications for the
acceptable temperature and humidity operating
ranges.
• Please install the Switch on a sturdy, level surface that
can support its weight.
• When connecting the power cord to the Switch and the
power outlet, the distance should be no more than
182cm.
• Please leave at least 10cm (about 4 inches) of space
at the front and rear of the Switch for ventilation.
2.2 Desktop or Shelf Installation
When installing the Switch on the desktop or shelf, please
attach the rubber feet to the Switch. Peel off the protective
paper on the pads and attach them to the bottom of the
Switch (one at each corner).
Section 2