2 cmos clear (j1), 3 buzzer enable/disable (j9), Table 2-3: cmos clear (j1) – Advantech PCM-9570/S 2006957006 5th Edition User Manual

Page 27: Table 2-4: buzzer enable/disable (j9)

Chapter 2 Installation

When the CPU is installed, the lever should snap into place at the side
of the socket.

Note:

To remove a CPU, pull the lever out to the side a little
and raise it as far as it will go. Lift out the CPU chip.

2.6.2 CMOS clear (J1)

Warning:

To avoid damaging the computer, always turn off the

power supply before setting “Clear CMOS.” Set the
jumper back to “3V Battery On” before turning on the
power supply.

Table 2-3: CMOS clear (J1)

* 3 V battery on

Clear CMOS

* default setting

2.6.3 Buzzer enable/disable (J9)

Table 2-4: Buzzer enable/disable (J9)

* Enabled

Disabled

* default setting