ACTiSYS ACT-IR100M - Manual (Page 9)

ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP
PARTS CHECK LIST
When you unpack the package, the following items should be found.
IR100M IR100MB IR100M+ IR100MP
Print Adaptor ◎ ◎ ◎ ◎
Floppy Disk
User’s manual &
Win95Driver
◎ ◎ ◎ ◎
IR220L+ Dongle Built-in IrDA Port ◎ Built-in IrDA Port
AC Adaptor ◎ ◎ ◎
User Guide (Booklet) ◎ ◎ ◎ ◎
SYSTEM REQUIREMENTS
To use ACT-IR100M+/IR100M/IR100MP, you MUST meet the following requirements.
Your PC which use passing through:
• A Centronics parallel port.
• A cable connecting your PC Centronics port and IR100M+/IR100M/IR100MP Centronics 36F port.
• A printer which is within ACTiSYS IR100M+/IR100M/IR100MP compatibility list.
• Proper printing software and proper printer driver on your PC.
• Window 95/98/Me/2000/XP.
• 110V/220 AC electrical outlets ACT-IR100M+ or ACT-IR100M.
Your Mobile Device which use infrared:
• An infrared port which is compliant IrDA 1.0.
• A printer which is on ACTiSYS IR100M+/IR100M/IR100MP compatibility list.
• Proper printing software and proper printer driver on your mobile device. We recommend
ACTiPrintCE for Window CE and ACTiPrintPalm for Palm OS.
• Windows CE 3.0 or above if your mobile device’s OS is Window CE.
• Palm OS 3.2 or above if your mobile device’s OS is Palm OS
• Windows 95/98/Me/2000/XP if you mobile device is Laptop PC
• 110V/220V AC if ACT-IR100M+ or ACT-IR100M.
A Parallel Printer which is compliant with Centronics protocol and Centronics-B (DB36) connector.
Note: If a printer states to support DOS, it complies Centronics protocol.
Release 3.2, December 9, 2003 9
© Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved