Kramer Electronics FC-49 - Manual (Page 8)

FC-49 – Overview 5
3.1 Defining the FC-49 DVI / Audio to HDMI Converter
Figure 1: FC-49 DVI / Audio to HDMI Converter
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 AUDIO
INPUTS
S/PDIF RCA Connector Connects to the digital audio source
3 OPTICAL TosLink®
Connector
Connects to the digital audio source
4 ANALOG 3.5mm Mini
Jack
Connects to the analog audio source
5 DVI IN Connector Connects to the DVI source
6 HDMI OUT Connector Connects to the HDMI acceptor
7 OUT LED Illuminates to indicate that a display is
connected
8 IN LED Illuminates to indicate a signal at the input
9 ON LED Illuminates when receiving power
10 EDID CAPTURE Button Press and hold to acquire EDID
The audio inputs are automatically detected: if a digital input (S/PDIF or
TOSLINK®) is detected, the machine selects the digital input. If no
digital input is detected, the machine selects the analog input.
Note that S/PDIF and TOSLINK® inputs cannot be connected
simultaneously.
i