Hawk Industries T-Wrex Jr. Manual Serial Numbers 104 to 110 - Manual (Page 2)

2
T-WREX CONFIGURATIONS
JR. T-WREX
51200 remote pneumatic pilot (51886 + 51882),
+EXT JR for 180” reach capabiltiy, 134” standard
51200H remote hydraulic pilot (51886H + 51882)
51200E remote MODBUS RS485 2WIRE control (51886E + 51882)
51200HE remote MODBUS RS485 2WIRE control & rig-floor console
(51886E + 51882 + rig floor console 51507H + control handover
51507HE)
SR. T-WREX
51700 remote pneumatic pilot (51886 + 51887)
51700H remote hydraulic-pilot rig-floor console(51886H + 51887)
5700E remote MODBUS RS485 2WIRE control (51886E + 51887)
51700HE remote MODBUS RS485 2WIRE control & rig-floor console
(51886E + 51887+ rig floor console 51507H + control handover
51507HE)
JR. CAPABILITIES:
Wrenches: 3 1/2” - 8” outside diameter
Torque to: 60,000 ft. lbs.
Break out: 80,000 ft. lbs.
Min. reach:
Max. reach: 134” (post center to well center)
Height travel: 38”
Spinner: 2.875” - 8” outside diameter
Shoulders at 3000 ft./lbs on 5” pipe
SR. CAPABILITIES:
Wrenches: 4” - 9.5” tool joint outside diameter
Torque to: 100,000 ft. lbs.
Break out: 120,000 ft. lbs.
Min. reach:
Max. reach: 145” (post center to well center)
Height travel: 38”
Spinner: 2.875” - 9.5” outside diameter
Shoulders at 3000 ft./lbs on 5” pipe