Pulsafeeder OMNI Series DC2-6 EN - Manual (Page 25)

21
9. Model Number Identification
Position Sample Specifies Options
1 and 2 DC DC = OMNI model pump
3 and 4 3B Size/Flow 2 / 3 / 4 / 5 / 6 – diaphragm diameter
A / B / C / D – stroking rate
See sales literature for flow/pressure ratings
5 X Motor frame 1 – ½ Hp, 1 pH 115/230V, 71 frame
and size 2 – ½ Hp, 1 pH, 115/230V, 56 frame
3 – ½ Hp, 3 pH, 230/380V, 71 frame
4 – ½ Hp, 3 pH, 230/380/460V, 56 frame
5 – MPC control with 56 frame motor
6 – MPC control, NO motor, 56 frame
7 – MPC control with 71 frame motor
8 – MPC control, NO motor, 71 frame
X – no motor, set up for 56 frame
Y – no motor, set up for 71 frame
6 F Wetted materials F – PVDF, PTFE o-rings, ceramic ball
E – PVC (note - obsolete)
A – 316ss, PTFE o-rings
P - Polypropylene, DC 5 and 6 only
7 P Connections P – NPT
B – ISO 7-1 (not available on DC2)
8 - * position 8 is a dash
9 Option * MPC control M – indicates supplied with MPC controller
10 Option * Input voltage 1 – 115V 60 Hz
2 – 230V 60 Hz
3 – 110V 50 Hz
4 – 220V 50 Hz
11 Option * Remote cable X – standard length remote at pump
C – extended cable length
12 Option * Language E – English
F - French
S - Spanish
G - German
* - If no MPC controller is ordered, the model string ends at position 7. Positions 8 through 12 are
not entered for a pump without the MPC.