Aube Technologies Pilot-wire Programmer TH134 - Manual

TH134 400-134-000-A 1/27/05 1/4
TH134 is an electronic six-order pilot-wire programmer that allows
separate temperature control of three zones using four programs
per day. The TH134 programmer has three pilot-wire outputs can
be connected to thermostats or controller that accept pilot-wire sig-
nals.
The TH134 programmer has a remote input to which a telephone
controller (such as Aube’s CT240), a home automation system
(HAS) or an energy manager can be connected. When a signal is
received from any of these devices, TH134 forwards the order to
the heating units.
The following table shows the different means of initiating an order.
Installation and User Guide Installation and User Guide Installation and User Guide Installation and User Guide Installation and User Guide Installation and User Guide Installation and User Guide Installation and User Guide Installation and User Guide Installation and User Guide
n
Order buttons
o
Mode selection button
p
Zone selection button
q
Time/day setting button
r
Program button
s
Return button
t
Selection button
u
Display
n
Time
o
Heating modes
:Comfort mode
: Setback modes
(icon is steady in 3,5k setback;
flashes in 1k and 2k setbacks)
: Frost protection
: Off
p
Operating modes
- Manual mode
- Auto mode
q
Zone selected (the letter A
appears when all 3 zones are
selected)
r
Current program (applicable to
automatic mode only)
Maintain temperature at setpoint (Comfort) No signal
√ √
Maintain temperature at setpoint minus 3,5°C (3,5k setback)
√
Maintain temperature at 7°C (frost protection)
√
Turn heating Off (Off)
√
Maintain temperature at setpoint minus 1°C (1k setback)
√
Maintain temperature at setpoint minus 2°C (2k setback)